Multi-repair compound

An all rubber, universal roof repair cement used for flashings, seams, pitch pans, cracks, splits and making various repairs on all roof types.

Multi-repair compound for EDPM/PVC

Polyprene® is a rubber, universal roof repair cement used for flashings, seams, pitch pans, cracks, splits and making various repairs on EPDM/PVC roofs. We offer a special Polyprene® with extra agents that provide maximized adhesion specifically for EPDM and PVC roof repairs. Polyprene® for EPDM/PVC offers a water-tight and long-lasting seal. The heavily-fibered, high-solids content prevents mud cracking, making it ideal for pitch pans as well as to seal seams, cracks, around vibrating rooftop equipment, skylights, vents, flashings, and more. Polyprene® for EPDM/PVC is available only in heavy brush grade.

• Quickly and easily reinforces critical areas
• All rubber, fiber reinforced — stays flexible and won't crack when cold
• May be used with or without PolyCore™ reinforcement, as needed
• Can be applied thick, in one layer, without threat of mud cracking

Seam and fastener sealer

• Designed to mend roof seams and fasteners on metal roofs
• Locks seals properly tightened fasteners and protects against rust and future failure at critical points
• The specially compounded, synthetic rubbers elongate further when warm and needed most and become stronger in cold climates, keeping seams and fasteners sealed in all climates.
• Works in tandem with Polyprene cement and Topps Seal

Water-based seam sealer

• Seam and fastener sealer for use on Topps Seal® WB (water-based) applications.
• SeamGuard WB plugs gaps up to 1/16" wide, offering protection against hairline cracks that can wreak havoc on your structure.
• Applied in two coats, SeamGuard WB develops into an effective, membrane-like seal that repels moisture.

Repair reinformcement mesh

• Stitch bonded 100% polyester reinforcing membrane
• The premier membrane for adding strength to critical roof areas and repairs.
• With superior multi-directional strength and elongation properties, our four-inch PolyCore is suitable for seams, while our six-inch PolyCore works well for flashings. Forty- and forty-two-inch rolls help to cap large sections, including entire roofs.

Liquid Gutter Liner

• Seals and relines all types of gutters
• A tough, reliable rubber liner, effectively mitigates gutter and roof damage.
• Constructed wholly of rubber, preventing the invasion of moisture for the short- and long-term.
• Promotes optimal gutter functioning alongside fewer cleanings.

For roof rust removal using solvent-based coating

• Dissolves light corrosion and cleans the roof surface prior to power washing.
• Applied to metal roof surfaces prior to power washing on.
• Easy to use and may be brushed or sprayed on.
• Pre-mixed and ready to use.

Ends roof rust and primes for water-based coating

• Prepares rusty metal for coating with water-based Topps Seal® WB.
• This water-borne product chemically converts rust to a more stable oxide when applied after power-washing.
• Dries into a primer that blocks future rust after coating.
• Apply only to rusty areas
• Designed for use with water-based coatings only.

The perfect bonding product for a bitumunous system

• A powerful bonding product to ensure that your sealant adheres properly to the surface.
• Instantly blocks color bleed-through from underlying bitumen.
• Assures maximum color development and reflectivity of the top coating.
• Enhances Topps Seal® adhesion to BUR, ModBit and other bituminous surfaces.

Masonry and concrete primer

• This penetrating, clear, thin primer is used to prepare porous, non-painted masonry and concrete for sealing with Topps Seal® and other coatings.
• Absorbs and bonds light surface oxidation and forms an initial seal beneath the surface. Prepares oxidized or chalked surfaces so they may be coated over with excellent adhesion by a sealant like Topps Seal.
• ClearSeal™ applies at approximately one gallon per 100 - 150 sq. feet. The coverage will depend on usage.

FOR NEAR ZERO VOC ROOF COATING.

• A durable elastomeric roof and sidewall coating for use where water-based chemistry is required.
• Provides 100% elastomeric protection that is ENERGY STAR® qualified as a top performing roof coating for cooling.
• The specialty weather-resistant protective finish provides protection and maintenance with zero VOC for roofs where national VOC standards do not apply.

100% ACRYLIC ELASTOMERIC

• Creates an instant cool roof weathering shield using a superior combination of ingredients developed for value driven performance.
• Applies using ordinary roller or airless spray direct to clean and properly prepared roofs that drain well and do not pool water.
• Suitable for all climates.

20-YEAR SELF-SEALING WATER-BASED METAL ROOF SEALANT

• Reduces rooftop temperatures and maintenance cost and leaks associated with thermal shock
• Combines elastomeric coating benefits with the most durable water-based, new-generation technology for long-lasting rooftop performance in all climates.
• Twice the durability of conventional 100% acrylic coatings
• The result—the ultimate all-water-clean-up protective roof coolant ideally suited to those conditions associated with rooftops.

THE ULTIMATE SKYLIGHT SEALANT

• A resin rich, clear formula used to seal skylights.
• Creates a shield of protection over your fiberglass or polycarbonate skylight. This will help to protect against oxidation and chalking and helps lessen the impact of environmental factors like acid rain and other pollutants.
• Extends the life of fiberglass / polycarbonate skylights by creating a pliable layer of protection